Swivelling vice for mounting pump during assembly / disassembly.
Universal bracket for mounting PES type pump on swivelling vice 03-KDEP 2919/1.
Flange for mounting PES type pumps on swivelling vice (with bracket 03-KDEP 2963).
Universal clamp for PE(S) type pumps. To be fitted on swivelling vice 03- KDEP 2919/1.
Tappetholder for lifting roller tappets off the camshaft.
Tappet holder for tappets without adjusting screws.
Slotted wrench for holding the camshaft while loosening or tightening the coupling/injection timer retaining nut.
Extractor for removing the drive coupling from camshaft.
Drift for fitting base closing plugs in pump housing.
Tappet foceps for holding and pushing the roller tappes.
Extractor for single sealing delivery valve.
Ring wrench for unscrewing the ring type locknut of automatic control rack stops.
Wrench for unscrewing control rack threaded sleeve.
Threaded wrench for unscrewing the threaded control rack guide bush without slot.
Wrench for unscrewing control rack guide bush with slot.
Wrench for unscrewing fuel gallery closing plug.
Puller collet and bell set for removing outer race of bearing from the end covers.
Reamer for control rack guide bush (single piece execution).
Collet for extracting guide ring of 2 piece execution guide bushes.
Reseating cutter for smoothening the element barrel seats in pump housing.
Sleeve for Mounting oil seal on camshaft (17 mm cone).
Sleeve for Mounting oil seal on camshaft (20 mm cone).
Bar for measuring projection of camshaft taper.
Gauge holder for measuring camshaft end play (17 mm cone).
Gauge holder for measuring camshaft end play (20 mm cone).
Plunger plier for holding the element plunger while assembling.