OTC Motorcycle/ATV Lift


The OTC Stinger motorcycle lift has a 1,500 lb. capacity and 17" long skids that will lift the largest, widest cruisers. Lowest clearance available, 3-1/2" at lowest level, with a wide lift range of 3-1/2" to 16-3/4". Removable handle provides 360° access to load.


Features also include foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety. Two-year warranty.

1,000 LB. CAPACITY HIGH-LIFT TRANSMISSION JACK

Universal Saddle Tilts Front to Back And Side to Side .


Features


  • Adjustable Corner Brackets and safety chain for optimum positioning of the load.
  • Flash Chromed Rams Inhibit Rust From Entering The Hydraulic System.
  • Foot Operated Pump and Lowering Pedal For ease of Control when positioning OR Removing A Transmission.
  • Wide Leg Base with 4 "Polyurethane Swivel Wheels that Provide Stability and easy Maneuvering".
  • Safety Overload System to prevent Jack from being used Beyond its Rated Capacity.

OTC Engine Lifting Jib Crane


Included with the pump, are accessories essential for one-man brake bleeding,
and testing and diagnostics or vacuum and pressure related engine systems.
With this kit, one person can quickly and cleanly bleed automotive brake
and hydraulic clutch systems, as well as get answer to numerous diagnostic and mechanical problems.


Features


  • 1 ton capacity.
  • Folds-up for compact storage.
  • Front wheels are 3-1/2“ with 5-7/8“ rear casters.
  • Crane has a reach of 24“ to 36“

OTC PRO9D PLUS lift


OTC PRO9D PLUS LIFT - The cost-effective solution for service tasksClear floor Model Asymmetric ARM Disign with Symmetric Post for ease of vehicle entry and exit.


Features


  • Padded shut-off bar to prevent damage caused by lifting a vehicle too high.
  • Reliable, self-setting locking system with easy to reach lock latch handle.
  • Powder coat finish more durable than conventional finishes.
  • Symmetric 2-post lift with Asymmetric arm Design provide more pickup points than ever before.
  • Two heavy-duty hydraulic cylinders designed to minimize down -time by requiring little maintenance.
  • Spring Operated arm restraints, disengage at floor level.
  • Anchor bolts included -installation requires 4.25" of concrete.
  • Adapter and bracket included.
  • Optional screw-up truck adapters and 3.5" adapter extensions available(shown with 5" adapter)


Technical Specifications

Parameter

Value

Capacity4082kg
Overall Height3642mm
Height to shut-off3499mm
Minimum Ceiling Height3658mm
Minimum Adapter Height(Standard adapters)93mm
Maximum Lifting Height1930mm
Adapter Extension Hights(stack type)45mm,130mm
Front Arm Reach711mm-1054mm
Rear Arm Reach800mm-1137mm
Overall Floor Width3353mm
Inside Column Width2769mm
Drive Through2515mm
Voltage (Single Phase Standard)208/230V
Amps20
Motor2 HP
ModelPRO9D PLUS

Bosch Electro - Hydraulic Lift (VHL 2235)


Bosch VHL 2235 LIFT - The cost-effective solution for service tasks.
User friendly, space saver well proved version with floor cove.


Features


  • Loading Capacity 3.5 tons.
  • User-friendly, space saver well proved version with floor cover.
  • Electro-hydraulic drive with maintenance free cylinders. No wear of mechanical parts.
  • Steel rope for synchronization.
  • CE pump.
  • JT/155-2004 certification.
  • 24V operation box and IP 54 standard.
  • High safety: Emergency stop button, automatic safety locks, automatic arms lock, height limit switch


Technical Specifications

Parameter

Value

SynchronisationSteel rope
OperationPress button/Handle
Loading capacity3.5 tons
Total height2812mm
Maximum lifting height1780mm
Minimum lifting height100mm
Total width3384mm
Pass through width2760mm
Support arm2pieces, dissymmetry
Short support arm680-1020mm
Long support arm680-1300mm
Lifting up time<60s
Lifting down time<45s
Loading carriage lockAutomatic/ release on both posts
Support arm lockSupport arm lock
Height limit switchYes
Over load protectionYes
CENo
Power Supply3 phases/380V/50Hz
JT/T 155-200Yes

Bosch Electro - Hydraulic Lift (VHL 2235H)


Bosch VHL 2235H LIFT - The cost-effective solution for service tasks.
User friendly, gantry type 2 post lift.


Features


  • Loading capacity 3.5 tons.
  • User friendly, gantry type 2 post lift.
  • Electro-hydraulic drive, with maintenance free cylinders. No wear of mechanical parts.
  • Steel rope for synchronisation.
  • CE & JT/155-2004 certification.
  • 24V operation box and IP54 standard.
  • High safety: Emergency stop button, automatic safety locks, automatic arms lock, height limit switch


Technical Specifications

Parameter

Value

Synchronisation4082kg
Operation3642mm
Loading capacity3.5 tons
Total height3700mm
Maximum lifting height1780mm
Minimum lifting height100mm
Total Width3384mm
Pass through width2760mm
Support arm2pieces, dissymmetry
Short support arm680-1,020mm
Long support arm680-1300mm
Lifting up time<60s
Lifting down time<45s
Loading carriage lockAutomatic/ release on both posts
Support arm lockAutomatic
Height limit switchYes
Over load protectionYes
Emergency stopYes
Power Supply3 phases/380V/50Hz
JT/T 155-200Yes