TRANSMISSION JACK
Universal Saddle Tilts Front to Back And Side to Side .
Features
- Adjustable Corner Brackets and safety chain for optimum positioning of the load.
- Flash Chromed Rams Inhibit Rust From Entering The Hydraulic System.
- Foot Operated Pump and Lowering Pedal For ease of Control when positioning OR Removing A Transmission.
- Wide Leg Base with 4 "Polyurethane Swivel Wheels that Provide Stability and easy Maneuvering".
- Safety Overload System to prevent Jack from being used Beyond its Rated Capacity.
Engine Lifting Jib Crane
Included with the pump, are accessories essential for one-man brake bleeding, and testing and diagnostics or vacuum and pressure related engine systems. With this kit, one person can quickly and cleanly bleed automotive brake and hydraulic clutch systems, as well as get answer to numerous diagnostic and mechanical problems.
Features
- 1 ton capacity.
- Folds-up for compact storage.
- Front wheels are 3-1/2“ with 5-7/8“ rear casters.
- Crane has a reach of 24“ to 36“
2 Post Clear Floor lift
2 Post clear Floor Service Lift - The cost-effective solution for service tasksClear floor Model Asymmetric ARM Disign with Symmetric Post for ease of vehicle entry and exit.
Features
- Padded shut-off bar to prevent damage caused by lifting a vehicle too high.
- Reliable, self-setting locking system with easy to reach lock latch handle.
- Powder coat finish more durable than conventional finishes.
- Symmetric 2-post lift with Asymmetric arm Design provide more pickup points than ever before.
- Two heavy-duty hydraulic cylinders designed to minimize down -time by requiring little maintenance.
- Spring Operated arm restraints, disengage at floor level.
- Anchor bolts included -installation requires 4.25" of concrete.
- Adapter and bracket included.
- Optional screw-up truck adapters and 3.5" adapter extensions available(shown with 5" adapter)
Technical Specifications
Parameter |
Value |
|---|---|
| Capacity | 4082kg |
| Overall Height | 3642mm |
| Height to shut-off | 3499mm |
| Minimum Ceiling Height | 3658mm |
| Minimum Adapter Height(Standard adapters) | 93mm |
| Maximum Lifting Height | 1930mm |
| Adapter Extension Hights(stack type) | 45mm,130mm |
| Front Arm Reach | 711mm-1054mm |
| Rear Arm Reach | 800mm-1137mm |
| Overall Floor Width | 3353mm |
| Inside Column Width | 2769mm |
| Drive Through | 2515mm |
| Voltage (Single Phase Standard) | 208/230V |
| Amps | 20 |
| Motor | 2 HP |
| Model | PRO9D PLUS |
Electro - Hydraulic Floor Lift
Floor Lift LIFT - The cost-effective solution for service tasks.User friendly, gantry type 2 post lift.
Features
- Loading capacity 3.5 tons.
- User friendly, gantry type 2 post lift.
- Electro-hydraulic drive, with maintenance free cylinders. No wear of mechanical parts.
- Steel rope for synchronisation.
- CE & JT/155-2004 certification.
- 24V operation box and IP54 standard.
- High safety: Emergency stop button, automatic safety locks, automatic arms lock, height limit switch
Technical Specifications
Parameter |
Value |
|---|---|
| Synchronisation | 4082kg |
| Operation | 3642mm |
| Loading capacity | 3.5 tons |
| Total height | 3700mm |
| Maximum lifting height | 1780mm |
| Minimum lifting height | 100mm |
| Total Width | 3384mm |
| Pass through width | 2760mm |
| Support arm | 2pieces, dissymmetry |
| Short support arm | 680-1,020mm |
| Long support arm | 680-1300mm |
| Lifting up time | <60s |
| Lifting down time | <45s |
| Loading carriage lock | Automatic/ release on both posts |
| Support arm lock | Automatic |
| Height limit switch | Yes |
| Over load protection | Yes |
| Emergency stop | Yes |
| Power Supply | 3 phases/380V/50Hz |
| JT/T 155-200 | Yes |
