Battery Charger cum Jump Satarter
TAGLab Rapid Battery Charger cum Jump Satarter - Model : BML1220 is designed for charging wide range of automotive lead acid
batteries used for Motorcycles, Passenger Cars, Jeeps, SUVs, Trucks, Tractors and other Commercial Vehicles.
The BML1220 charger is equipped with a microprocessor (MCU - Micro Computer Unit) and features fully automatic 9 stages charging and maintenance.
Features
- Jump Start function 100A / 12V.
- 12-Volt & 6-Volt, all types of lead-acid batteries (AGM, WET, GEL, VRLA, etc.)
- Alternator test
- Trickle charging for optimum battery care
- Power backup and Regeneration functions
- Protection from Short Circuit, Reverse Polarity, Sparking, Over Heat, Over Current, Over Charge.
Technical Specifications
Parameter Input |
Value |
|
|---|---|---|
| Charging Capacity | 12V : 5 ~ 400 Ah | |
| Frequency | 50 Hz(Frequency range = 47-53 Hz) 6V : 1.2 ~ 80 Ah |
|
| Charging Voltage | 14.6V 7.3V | |
| Charging Current | 20A /10 A | |
| LED Display | Voltage (V) Current (A) Charge (%) | Selectable | Mode Type Amp |
Taglab Battery Charger (C4)
The Taglab C4 battery chargers make charging depleted car batteries quick and easy. These modern battery chargers are also a good choice for those looking to maintain the charge on their motorcycle, convertible or motorboat batteries while they are not in regular use. Now TagLab has simplified the operation of both charging units even further with the addition of a memory function and a two-piece charging cable that features a plug-in interface.
Features
- Highly recommended for Car owners.
- Simple and intuitive to operate – operating errors are virtually excluded.
- Provide convenient navigation – with a central adjusting button.
- Monitor themselves with an innovative safety concept.
- Convenient single-button operation battery charger.
- Suitable for lead-acid, AGM, wet, and gel batteries.
- Intelligent monitoring and automatic charging – controlled by an internal MCU (microcomputer unit).
- Charging cable with plug-in connection: Easy to detach, easy to reconnect.
- Ergonomic handling, Rugged, Reliable and Robust Design.
- High quality of cables and terminals: Protected against dust and splashes (IP 65).
Technical Specifications
Parameter |
Value |
|
|---|---|---|
| Charging Voltage | 14.7V (±0.25V)7.2V (±0.25V) | |
| Charging Current | 2 A/ 4 A (±10%) | |
| Rated Output current | 0.8A/ 3.8A | |
| Rated Output Voltage | 6V, 12V | |
| Rated Input voltage | 230V/ 50Hz | |
| Battery Type | Lead/acid wet and gel, AGM, EFB | |
| Battery Capacity | 6V:1.2Ah-16Ah12V:5Ah-130Ah | |
Battrey Charger (C8)
The TagLab C8 battery chargers make charging depleted car batteries quick and easy. These modern TabLab battery chargers are also a good choice for those looking to maintain the charge on their motorcycle, convertible or motorboat batteries while they are not in regular use. Now Taglab has simplified the operation of both charging units even further with the addition of a memory function and a two-piece charging cable that features a plug-in interface.
Features
- Highly recommended for Car owners.
- Simple and intuitive to operate – operating errors are virtually excluded.
- Provide convenient navigation – with a central adjusting button.
- Monitor themselves with an inno¬vative safety concept.
- Convenient single-button operation battery charger.
- Suitable for lead-acid, AGM, wet, and gel batteries.
- Intelligent monitoring and automatic charging – controlled by an internal MCU (microcomputer unit).
- Charging cable with plug-in connection: Easy to detach, easy to reconnect.
- Ergonomic handling, Rugged, Reliable and Robust Design.
- High quality of cables and terminals: Protected against dust and splashes (IP 65).
Technical Specifications
Parameter |
Value |
|
|---|---|---|
| Charging Voltage | 27.9V(±0.25V) 14.4V(±0.25V) | |
| Charging Current | 8A/ 4A(±10%) | |
| Rated Output Voltage | 12V, 24V | |
| Rated Input voltage | 230V/ 50Hz | |
| Battery Type | Lead/acid wet and gel , AGM | |
| Battery Capacity | 12V:5Ah-280Ah 24V: 14Ah-150Ah | |
